John derre setting

Significance of John Deere Combine Settings

Agriculture & Farm

Introduction:

Harvesting marks the vital last stage in any long term farming activity. In the not-too-distant past, harvesting was quite a challenging task and involved a lot of manpower and time. Technology and meaningful mechanization of the farming process has changed the whole situation. In particular, harvester combines come to the aid of farmers to harvest different types of crops efficiently. The whole process gets further enhanced by using the right kind of John Deere Combine settings.

Why John Deere Combines Settings Matter?

John Deere Combines are easily the finest type of harvesters available in the market. This is so as these combines are produced by the global leaders in farm equipment production – John Deere & Company. However, to derive the maximum benefit out of these high-quality combines, the John Deere Combine settings must also be carried out with care and skill.

That will ensure the quality and optimum yield of the grain harvested.

John Deere Combine Settings Tips:

Combine settings

The process of harvesting is packed with challenges. This activity is quite complex since a variety of crops are involved and nature of the crop and the terrain varies widely. For example, the process associated with harvesting high-moisture corn is a little different from the way you harvest dry corn. This requires adjustments and configuration changes in the John Deere Combine settings.

Beginning with the front part of the combine, farmers need to work through various parts of the combine and make fine adjustments of the settings. These adjustments must start at the header. You need to ensure that the header feeds in the crop in a uniform manner and in the proper direction. This step is crucial since over 80% of the grain loss happens at the header. This is followed by adjusting the concave and sieve.

The position of the drum has to be kept upright and the conveyor speed maintained at a lower level. Normally, fifteen threshing elements are in the standard combine configuration when wet corn is involved. In the process, if you notice grain damage, you may need to replace the elements of a few rows by smoother ones. The link between the concave and the rotor should be considered too. The type of concave to be used for good performance is the round bar version, if wet corn is involved.

Generally speaking, it is advisable to have in place John Deere Combine settings such that concave clearance matches the cob diameter. If the clearance of the concave is too wide or shut too tight, cracked and broken grains increase. The operator must make sure that the Rotor is set at a conveniently slow speed and the concave needs to be set as open as required.

An important tip to be always remembered is that we ought to make just one adjustment at any one instance, while carrying out the settings.

Related Articles – The Choice Of The Right Combine Concave Manufacturers, The Splendor Of The XPR Concaves

Conclusion:

John Deere Combine settings if performed properly, will ensure the highest productivity. The grain loss, if any, would be minimal and not exceed acceptable levels. The quality of grain harvested will be quite good too. Thus the industrious and enterprising farmers get a well-deserved reward.

Leave a Reply

Your email address will not be published. Required fields are marked *